Graco PR70 Manual

Feed Systems
PR70
2 Component
Liquid Dispensing Systems
312394B
PR70 Feed Systems All Models
For use in dispensing of sealants and adhesives
Important Safety
Instructions
Read all warnings and
instructions in this manual.
This manual is supplemental and
only covers some very specific
warnings and instructions as they
pertain to the feed systems. Please
refer to manual 312393 for a
complete list of warnings, wetted
materials, warranty information
and instructions for the entire
machine.
PROVEN QUALITY, LEADING TECHNOLOGY.
GRACO OHIO INC. 8400 PORT JACKSON AVE. NW NORTH CANTON, OH 44720-5464
Phone: 330.966.3000 Fax: 330.966.3006 www.liquidcontrol.com
LiquidControlService@graco.com LiquidControlParts@graco.com
Copyright 2007, Graco Inc is a registered to I.S. EN ISO 9001

Graco PR70 Specifications

General

Hose Length	Customizable
Power Source	Electric
Ratio Range	1:1 to 12:1
Viscosity Range	Up to 1, 000, 000 cps
Materials	Epoxies, polyurethanes, silicones, and other two-component materials
Applications	Potting, encapsulation, gasketing, sealing, bonding
Dispensing Capacity	Variable, based on configuration
Weight	Approximately 150 lbs
Dimensions	Varies based on configuration