Graco PR70 Repair And Parts

Repair - Parts
PR70 and PR70v
Two Component Liquid Dispensing Systems
Fixed or variable ratio systems. For accurate metering, mixing, and dispensing of
two-component materials. For professional use only.
Not approved for use in European explosive atmosphere locations.
3000 psi (21 MPa, 207 bar) Maximum Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
Important Safety Instructions
Read all warnings and instructions in all
supplied manuals. Save these instructions.
ti12385b
PR70v Shown with Advanced Display Module
312760Y
EN

Graco PR70 Specifications

General

Hose Length	Customizable
Power Source	Electric
Ratio Range	1:1 to 12:1
Viscosity Range	Up to 1, 000, 000 cps
Materials	Epoxies, polyurethanes, silicones, and other two-component materials
Applications	Potting, encapsulation, gasketing, sealing, bonding
Dispensing Capacity	Variable, based on configuration
Weight	Approximately 150 lbs
Dimensions	Varies based on configuration