Pressure Relief Procedure
Pressure Relief Procedure
Follow the Press ure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized until pressure
is manually relieved. To help preven t serious
injury from pressurized fluid, such as skin injection,
splashing fluid and moving parts, follow the
Pressure Relief Procedure when you stop spraying
and before cleani ng, ch ec ki ng , or se rvi cing
equipme nt.
The Fusion AP gun is shown.
1. Relieve pressure in gun and perform gun
shutdown procedure. See gun ma nual.
2. Close gun fl uid inlet valves A and B.
3. Shut off feed pumps and agitator, if used.
4. Route fluid to waste containers or supply tanks.
Turn PRESSURE RELIEF/SPRAY valves (SA,
SB) to PRESSURE RELIEF/CIRCULATION
. Ens ure gauges drop to 0.
5. Engage gun piston safety lock.
6. Disconnect gun air line and remove gun fluid
manifold.
333024F 43
Get other manuals https://www.bkmanuals.com
To Next Page
Loading...
