Graco Reactor A-25 Operation

Setup
24 309812D
Check pump wet-cups (R) daily. Keep filled with Graco
ISO pump oil, Part No. 217374, to keep air or moisture
from reacting with fluids.
13. Ground system
WARNING
Read warnings, page 8.
a. Reactor: is grounded through power
cord. See page 18.
b. Spray gun: connect whip hose ground
wire to FTS, page 21. Do not disconnect
wire or spray without whip hose.
c. Fluid supply containers: follow your local
code.
d. Object being sprayed: follow your local
code.
e. Solvent pails used when flushing: follow
your local code. Use only metal pails,
which are conductive, placed on a
grounded surface. Do not place pail on
a nonconductive surface, such as paper
or cardboard, which interrupts ground-
ing continuity.
f. To maintain grounding continuity when
flushing or relieving pressure, hold a
metal part of spray gun firmly to the side
of a grounded metal pail, then trigger
gun.
14. Fill wet-cups
WARNING
Pump rod and connecting rod move during operation.
Moving parts can cause serious injury such as pinch-
ing or amputation. Keep hands and fingers away from
wet-cups (R) during operation. Shut off pumps before
filling wet cups.
R
TI3582-3

Graco Reactor A-25 Specifications

General

Brand	Graco
Model	Reactor A-25
Category	Paint Sprayer
Language	English