Preparation
14
Setup
IMPORTANT
English Français Dutch
• Do not allow material to dry
inside pump, hoses, gun or
spray system.
WARNING
Read warnings, page 4.
1 Connect one end of air hose to
sprayer air outlet quick connect
and to gun air inlet quick
connect.
2 Connect one end of material
hose to material outlet (F) and
the other end to gun material
inlet. Firmly tighten connec-
tions.
3 Install spray nozzle (L). See
selection chart, page 22.
Pulling trigger when installing
nozzles, eases assembly.
4 Plug power cord in to properly
grounded outlet.
ti4298a
ti4011a
aa
F
ti4009a
L
ti4296a
To Next Page
Loading...
