Startup
20
Startup
WARNING
Read warnings, page 4.
CAUTION
1 Fill hopper (C) with prepared
texture material.
2 Install nozzle. See Nozzle
Selection Chart, page page 22.
3 Open gun air valve (aa). To avoid material packout in
needle, do not allow material to
flow out of gun when air valve (aa)
is closed for a sustained amount
of time.
If material gets in needle or gun
air passages, flush with water
immediately.
CAUTION
CAUTION
ti4302a
C
ti4009a
Nozzle
ti4000a
aa
To Next Page
Loading...
