Startup
21
4 Inspect 25 ft. material hose for
kinks which could restrict fluid
flow.
5 Follow System Priming, page
8.
6 Trigger gun into a pail. When
texture material appears at
nozzle, move gun to hopper
and circulate until there is a
solid stream of texture mate-
rial.
7 For proper spray pattern and
pump and gun adjustments,
see System Adjustment, page
23,
8 Adjust fluid flow (K) and/or gun
air valve (aa) to achieve
desired results.
ti4657a
WASTE
ti4290a
ti4000a
aa
ti4303a
K
To Next Page
Loading...
