Graco Trabon MSP Series - MGO Series Information; MGO Series Technical Specifications; MGO Series Dimensions

MGO Series
312497ZAB 31
MGO Series
Technical Specifications
*See Cycle Rate and Flow Guidelines Table, page 44.
Material Zinc Plated Steel and Phosphate Coated Cast Iron
Pressure (max)
3-7 section divider valve assembly 6000 psi (41 MPa, 414 bar)
8 section divider valve assembly 5500 psi (38 MPa, 379 bar)
9 section divider valve assembly 5000 psi (34 MPa, 345 bar)
10 section divider valve assembly 4500 psi (31 MPa, 310.3 bar)
11 section divider valve assembly 4000 psi (27 MPa, 27.6 bar)
Lubricant Oil or grease
Maximum Operating Temperature 200°F (93°C)
Maximum Cycle Rate With Cycle Pin 60 CPM
Maximum Cycle Rate Without Cycle Pin or With Prox
Cycle Switch
240-185 CPM*
Net Weight (approx.)
3 section divider valve assembly 45-lb. (20.41 kg)
4 section divider valve assembly 53 lbs. 5 oz (24.18 kg)
5 section divider valve assembly 61 lbs. 10 oz (27.95 kg)
6 section divider valve assembly 70 lbs. 15 oz (32.17 kg)
7 section divider valve assembly 80 lbs. 4 oz (36.40 kg)
8 section divider valve assembly 89 lbs. 9 oz (40.62 kg)
9 section divider valve assembly 98 lbs. 14 oz (44.84 kg)
10 section divider valve assembly 108 lbs. 3 oz (49.07 kg)
11 section divider valve assembly 117 lbs. 8 oz (53.40 kg)
Torque Ratings
Tie Rod Nut 12 ft. lbs (16.3 N.m)
Enclosure Plug 15 ft. lbs (20.3 N.m)
Outlet Port Plug 6-8 ft. lbs (8.1-10.9 N.m)
Valve Section Mounting Screw 12-13 ft. lbs. (16.3-17.6 N.m)