Storage
28 313381L
4. Turn pressure control knob clockwise until the pump
turns on.
5. When storage fluid comes out of prime tube (5-10
seconds) turn power switch OFF.
6. Turn Prime/Spray valve to SPRAY to keep storage
fluid in sprayer during storage.
Stowing Sprayer
1. Screw inlet screen onto
suction tube.
2. Coil hose. Leave it con-
nected to sprayer. Wrap
hose around hose wrap
bracket.
3. Secure a plastic bag
around suction tube to catch
any drips.
4. Store sprayer indoors.
NOTICE
• Before storing sprayer make sure all water is
drained out of sprayer and hoses.
• Do not allow water to freeze in sprayer or hose.
• Do not store sprayer under pressure.
ti12938a
ti13960a
Project Painter
150/170
To Next Page
Loading...
