4 3A9322B
NOTE: Gun 18H059 and Hose 2000354 are designed for use with the QuickShot sprayer only.
Pressure Relief Procedure
1. Turn Prime Knob up to PRIME position to
relieve system pressure.
2. Hold metal tip guard nut firmly to a grounded
metal pail. Point Spray Gun into pail,
disengage Trigger Lock, and trigger the
Spray Gun to relieve system pressure.
28▲ 18H084 Kit, warning labels
▲
Medical alert card (not shown)
17R476 English, Spanish, Portuguese (Brazil)
17A134 English, Chinese, Korean
179960 English, Spanish, French
17F690 Dutch, German, Italian
29 18H085 Kit, ground
30 18F891 Belt
31 18F810 Adapter, belt slide
32 18H056 Kit, needle valve, includes 1 of 37
33 18H057 Kit, solenoid, pot, trigger, switch
33a Spring, gun
33b Spring, plastic, sliding
33c Slide, lock, trigger
33d Cap, trigger
33e Knob, adjustment
33f Solenoid
34 18H058 Kit, housing, gun, includes 33a, 33b, 33c, 33d, 33e
35 18H059 Kit, gun, complete, includes 13, 14, 32, 33, 34, 36
36 19F831 Screw, cross-head
37 18H126 Kit, solvent gasket (qty. 5), includes removal/installation tool
--- 18H081 Kit, label, brand, Ultra (not shown)
--- 18H082 Kit, label, brand, Ultimate (not shown)
* Battery and charger are dependent upon in country requirements.
▲ Replacement safety labels, tags, and cards are available at no cost.
Ref.
Order
Part No.
Description
PRESSURIZED FLUID HAZARD
This sprayer builds up an internal pressure of
2000 psi (138 bar, 14 MPa) during use. Follow
the Pressure Relief Procedure whenever you
stop spraying and before cleaning, checking,
servicing, or transporting equipment to prevent
serious injury from pressurized fluid such as skin
injection and splashing fluid.
PERSONAL PROTECTIVE EQUIPMENT
Wear appropriate protective equipment when in
the work area to help prevent serious injury,
including eye injury and inhalation of toxic
fumes.
To Next Page
Loading...
