Cleaning
40
4 Cleaning
The cleaning schedule is the basis for all cleaning procedures.
WARNING!
Rotating blade can cause serious injuries.
Do not reach into the blade. To
clean, switch off the machine and pull out the mains plug beforehand.
When cleaning the blade, always wear protective gloves with wrist guards.
CAUTION!
The carriage is a moving part.
IMPORTANT!
Follow the specified sequence when cleaning. Do not use any abrasive cleaners
when cleaning the machine. These scratch metallic surfaces and impair hygiene
and slicing performance. Use only the cleaners and disinfectants that have been
approved by us, diluted as specified.
Do not use any harsh or abrasive cleaners or disinfectants.
Never use a high-pressure or steam cleaner.
Failure to observe any of these points will invalidate any warranty claims.
4.1 Preparing for Cleaning
• Press the red Off button (O button)
• Pull the mains cable from the electrical socket.
• Turn the adjusting knob for setting the slicing thickness
clockwise past “0” to the limit stop.
CAUTION!
The spikes on the last slice clamp plate and the chain can cause injuries.
!
To Next Page
Loading...
