Cleaning
50
x Correct position 3
Carriage:
x Insert the carriage bold in the bearing block and push the
carriage carefully to the working position.
CAUTION!
Press the carriage on the bearing block by hand and make
absolutely sure you tighten the star grip.
A loose carriage can cause injuries to the operator, damage
the machine and result in poor slicing performance.
CAUTION!
Tighten the star grip on the placing arm. A
loose arm can cause problems and
damage the machine.
x Slide the tray in recess side first (1) under the holding piece
as far as possible, then push it down onto the holding bolt.
CAUTION!
Ensure that the tray fits properly and
tightly to prevent it from falling down
during operation.
To Next Page
Loading...
