Gram BAKER M 950 - Errors and Alarms

765041776 Rev. 006 15
The display shows the software version, and relevant control lamps light up.
On cold cabinets, or if the cabinet has been turned off for a short time, and the
evaporator temperature is still below the freezing point, a defrost will be activated.
See the chapter “Defrosting”.
Temperature setting:
 Keep pressed. When doing this, the setpoint temperature is displayed.
While is kept pressed, the setpoint can be changed by pressing or .
 Each time or is pressed the temperature will change one degree. The
new value flashes in the display
 When the required setpoint has been set, let go of the keys, a short beep
sounds, and the settings are saved.
Errors and alarms
Display code
Description
OP The door is open.
A1 / OP Door alarm, if the door remains open, or is not closed correctly.
A2 Local high temperature alarm.
A4 External high temperature alarm
Applicable to all alarms: press to confirm the alarm. The display returns to normal
operation.
P
P
+
-
+
-
P