Seat functions and operation
26
Absorber **
The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The shock absorber settings are adjusted
automatically during travel.
It is not necessary to operate a control element
to carry out the adjustment.
Swivel
The swivel is released by pulling the locking
lever. It allows free swivelling of the driver's seat
to the right or left up to an end stop.
WARNING. Risk of accident!
Do not operate the locking lever for
swivel while driving.
After the adjustment, the locking lever must
latch into the desired position with an audible
click. It should not be possible to move the
driver's seat into another position when it is
locked
Fore/aft isolator
Under certain driving conditions (for example
with a trailer attached), it is us
eful to activate
the fore/aft isolator. This means that shock
impacts in the driving direction can be better
absorbed by the driver seat.
Position 1 = fore/aft isolator off
Position 2 = fore/aft isolator on
After the adjustment of position 1, the
locking lever must latch into the desired
position.
For that, the seat must be pressed backwards
until it latches with an audible click.
It should not be possible to move the
fore/aft isolator into another position when it is
locked.
* if fitted ** depending on model *** optional extra
To Next Page
Loading...
