Seat functions and operation
27
Fore/aft adjustment
The fore/aft adjustment is released by lifting the
locking lever.
WARNING. Risk of accident!
Do not operate the locking lever
while driving.
After the adjustment, the locking lever
must latch into the desired position with an
audible click. It should not be possible to move
the driver's seat into another position when it is
locked.
Do not lift the locking lever with your leg or
calf.
Seat pan angle adjustment
The angle of the seat pan can be individually
adjusted.
To adjust the angle of the seat pan, pull the left
handle upwards. By exerting pressure on or off
the front or rear part of the seat pan it can be
moved to the desired position.
The adjustment angle for the seat pan
inclination can be set in two steps of 2.5
degrees each.
Seat depth adjustment
The depth of the seat pan can be individually
adjusted.
To adjust the depth of the seat cushion, pull the
right handle upwards. By moving the seat
cushion backwards or forwards the desired
seating position can be reached.
* if fitted ** depending on model *** optional extra
To Next Page
Loading...
