Seat functions and operation
30
Seat heater and seat ventilation
The seat ven
tilation system makes sure that the
seat surface remains dry. Humidity in the
contact area of the seat will be taken away. This
ensures a comfortable, cool and clean seat
feeling.
Operate this switch to activate or deactivate the
seat heater and the seat ventilation.
0 Seat heater and seat ventilation OFF
1 Seat heater ON (seat ventilation OFF)
2 Seat ventilation ON (seat heater OFF)
Lumbar support
With the upper (1) and lower (2) switch the
curvature in the upper and lower area of the
backrest upholstery can be individually
adjusted. This increases both the seating
comfort and the performance of the driver.
The lumbar support curvature can be increased
pressing "+" or reduced by pressing "–" on the
relevant switch.
When the backrest upholstery does no longer
react to pressing "+", the maximum curvature
has been reached and the switch should be
released. If you continue pressing this switch
the whole seat may be lowered.
To avoid unnecessary loss of air, the
"+" button of the switches should not be
pressed any more when the air compartments
are completely filled.
* if fitted ** depending on model *** optional extra
To Next Page
Loading...
