LED
TR-069
A TR-069 client is a software application that allows service providers and equipment manufacturers to manage, configure,
and update their customers’ network-connected devices remotely.
Handset TX Gain (dB) Configures the transmission gain of the handset.
Enable HAC If enabled, the phone will be compatible with nearby hearing aids.
Enable Bootup Tone If enabled, the phone will emit a sound effect when it boots up.
LED Brightness: Active
Configures the LED brightness when the phone is active. Valid range is 0 to 10 where 0 is off and 10 is the
brightest.
LED Brightness: Idle
Configures the LED brightness when the phone is idle. Valid range is 0 to 10 where 0 is off and 10 is the
brightest.
Parameter Description
Enable TR-069 Enable or disable TR-069
ACS URL
URL of the TR-069 Auto Configuration Servers (e.g., http//acs.mycompany.com, or IP
address).
TR-069 Username ACS username for TR-069.
TR-069 Password ACS password for TR-069.
Periodic Inform Enable
Enables periodic inform. If set to "Yes", device will send inform packets to TR-069 Auto
Configuration Server.
Periodic Inform Interval
Configures periodic inform interval to send the inform packets to TR-069 Auto Configuration
Server.
Connection Request Username The username for the TR-069 Auto Configuration Server to connect the phone.
Connection Request Password The password for the TR-069 Auto Configuration Sever to connect to the phone.
Connection Request Port The port for the TR-069 Auto Configuration Server to connect to the phone.
CPE SSL Certificate The Cert File for the phone to connect to the TR-069 Auto Configuration Sever via SSL.
CPE SSL Private Key The Cert Key for the phone to connect to the TR-069 Auto Configuration Sever via SSL
Start TR-069 at Random Time
If enabled, TR-069 will send out the first INFORM message to the server on randomized
timing between 1 to 3600 seconds after the phone boots up.
To Next Page
Loading...
Need help?
General
