Advanced Settings
System Diagnostics
Syslog
Syslog is a protocol that computer systems use to send event data logs to a central location for storage. Logs can then be
accessed by analysis and reporting software to perform audits, monitoring, troubleshooting, and other essential IT operational
tasks
Notification Events
Action URL
The following section describes how we can use the settings present in the GHP to configure customizable notifications
follow cfg.xml, cfgMODEL.xml, cfgMAC, cfgMAC.xml, devMAC.cfg downloads configuration files
one by one and loads updates. If the same configuration items exist between files, the configuration
items that are later in the download order will overwrite the previous contents.
User Protection When user protection is on, P-values that the user sets will not be changed by provision or provider.
3CX Auto Provision
If enabled, the phone will send SUBSCRIBE requests to the multicast address in LAN during bootup
for the automatic provisioning. This feature requires 3CX server support.
Parameter Description
Validate Hostname in Certificate Configures tp validate the hostname in the SSL certificate.
Enable SIP NOTIFY Authentication Device will challenge NOTIFY with 401 when set to "Yes".
Factory Reset
Initiate factory reset.
All the configuration on the device will be erased.
Parameter Description
Syslog Protocol
Allows sending syslog through secured TLS protocol to the syslog server.
Note: CA verification is required.
Syslog Server The URL/IP address for the syslog server.
Syslog Level Selects the level logging of syslog.
Syslog Keyword Filter Syslog will be filtered based on the configured keywords. Multiple keywords can be separated by ",".
Send SIP Log Configures whether the SIP log will be included in the syslog messages.
Parameter Description
Phone Status
Setup Completed Configures the Action URL to send when phone finishes setup process.
To Next Page
Loading...
Need help?
General
