This section contains the basic settings of Hotel Service Management, including the basic general information of the hotel
where the GHP hotel phone is deployed and also the assigned room number.
E911 Service
E911 (Enhanced 911) service allows configuring of the GHP6xx to allow emergency calls to be made while providing the
location of of the user to be known to the call receiver.
Parameter Description
Hotel Name Configures the hotel name.
Hotel Address Configures the hotel address.
Hotel Phone Number Configures the hotel phone number.
Hotel Fax Number Configures the hotel fax number.
Hotel Room Number Configures the hotel's room number.
Parameter Description
Enable E911 Enable or disable E911.
HELD Protocol Configures HELD transfer protocol.
HELD Synchronization Interval
The valid synchronization interval is between 30 to 1440 minutes. The synchronization is off when
interval is 0.
Location Server Configures the primary Location Information Server (LIS) adderss.
Location Server Username
Configures the username of the primary Location Information Server (LIS).
Location Sever Password Configures the password of the primary Location Information Server (LIS).
Secondary Location Server Configures the secondary Location Information Server.
Secondary Location Server
Username
Configure the username of the secondary Local Information Server.
Secondary Location Server
Password
Configure the password of the secondary Location Information Server.
HELD Location Types Configure "locationType" element in the location request.
HELD Use LLDP Information
If set to "Yes", the information from LLDP-support switch is used to generate ChassisID and portID;
otherwise
HELD NAI
If set to "Yes", Network Access Identifier (NAI) is included as a device identity in the location
request sent to the Location Information
E911 Emergency Numbers A user can configure multiple emergency numbers separated with the delimiter symbol ";".
To Next Page
Loading...
Need help?
General
