Grandstream Networks GRP2601 Administration Guide

P a g e | 45
GRP260x Administration Guide
Version 1.0.1.18
Crypto Lifetime
Enable or disable the crypto lifetime when using SRTP. If users set to disable
this option, phone does not add the crypto lifetime to SRTP header. The
default setting is “Yes”.
VQ RTCP-XR Collector
Name
Configure the host name of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
VQ RTCP-XR Collector
Address
Configure the IP address of the central report collector that accepts voice
quality reports contained in SIP PUBLISH messages.
VQ RTCP-XR Collector
Port
Configure the port of the central report collector that accepts voice quality
reports contained in SIP PUBLISH messages.
Symmetric RTP
Defines whether symmetric RTP is supported or not. Default setting is “No”.
RTP Timeout (s)
Configures the RTP timeout of the phone. If the phone does not receive the
RTP packet within the specified RTP time, the call will be automatically
disconnected. The default range is 0 and 6-600. If set to 0, the phone will not
hang up the call automatically.
Account x → Call Settings
Call Features
Auto Answer
If set to “Yes”, the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep. Default setting is “No”.
Custom Alert-Info for
Auto Answer
Allows to customize Alert-Info header for auto answer. The phone will auto
answer only if matching content of the custom Alert-info header.
Allow Auto Answer by
Call-Info/Alert-Info
Allows the phone to automatically turn on the speaker phone to answer
incoming calls after a short reminding beep when enabled, based on the SIP
Call-Info/Alert-Info header sent from the server/proxy. Default is “Yes”.
Allow Barging by Call-
Info/Alert-Info
When enabled, the phone will automatically put the current call on hold and
answer the incoming call based on the SIP Call-Info/Alert-Info header sent
from the server/proxy. However, if the current call was answered based on
the SIP Call-Info/Alert-Info header, then all other incoming calls with SIP Call-
Info/Alert-Info headers will be rejected automatically. Default setting is “No”.
Send Anonymous
If set to “Yes”, the “From” header in outgoing INVITE messages will be set to
anonymous, blocking the Caller ID to be displayed. Default is “No”.
Anonymous Call
Rejection
If set to “Yes”, anonymous calls will be rejected.
The default setting is “No”.
Call Log
Configures Call Log setting on the phone.
• Log All Calls

Grandstream Networks GRP2601 Specifications

General

Brand	Grandstream Networks
Model	GRP2601
Category	IP Phone
Language	English