Allow user to set their Multi-Purpose Key to “Conference” mode to trigger
a conference.
By setting the extension number in the value box, the users will be able to
activate a 3-way conference by simply press the assigned MPK button.
• Call History
Select Account and enter account number in the Value field to allow
configuration of call log for other extension.
• Monitored Call Park
Select account from Account field and enter the call park extension in the
Value field to park/pick up the call, and also monitor the parked call via
Line Key’s light.
• Menu
Select this feature in order to display the Menu from the MPK buttons, no
field dis required for configuration.
• Information
Select this feature in order to display the Information popup to show the
firmware version, MAC address, IP address and IP Settings from the MPK
buttons, no field dis required for configuration.
• Message
Select this feature in order to display the Message menu from the MPK
buttons, no field dis required for configuration.
• Forward
Set the MPK Button to perform call forwarding to the destination number
configured on the “Value Field”. During ringing press the button to perform
the call forward.
• DND
Press the configured key to enabled/Disable DND.
• Redial
On this mode, the configured key can be used to redial numbers.
• Presence Eventlist
This option is similar to the Presence Watcher option but in this case the
To Next Page
Loading...
Need help?
General
