GRP260x Administration Guide
Version 1.0.1.18
PBX collects the information from the phones and sends it out in one single
notify message.
Note: The PBX server has to support this feature.
• Provision
Select this feature in order to make the phone trigger an instant
provisioning.
Select the account to be associated with the configured MPK.
Enter the value to be associated with the configured MPK
Enter the name to be associated with the MPK.
Shows a preview of the configured MPKs label. After saving, you can print the
card style in the preview. For more info about how to install the BLF paper label
check the Quick Installation guide.
Perform blind transfer, attended transfer, or a new call with the specific in the
Value field when a user presses "Transfer" multiple-purpose key
Enable Transfer via
Non-Transfer MPK
MPK with type BLF, Speed dial, etc, will perform as transfer MPK under active
call
Programmable Keys → Idle screen softkey
Custom Idle Screen
Softkey Layout
Enables/disables custom softkey layout. Default is disabled.
Press on Add Custom Softkey radio button to add/configure up to 3 custom
softkeys. Supported key modes are speed dial , speed dial via active account
and voicemail.
The softkeys listed under “Enabled” tab will be displayed on the phone’s idle
screen. Select the softkey from “Available” list to enable it.
Programmable Keys → Call screen softkeys
Custom Call Screen
Softkey Layout
Enables/disables custom softkey layout. Default is disabled.
Enforce Softkey
Layout Position
Whether to enforce the custom softkey layout position. When set to 'YES', GUI
will still preserve the space if the configured softkey is unable to show.
Default is disabled.
Press on Add Custom Softkey radio button to add/configure up to 3 custom
softkeys. Supported key modes are speed dial , speed dial via active account
To Next Page
Loading...
Need help?
General
