GRP260x Administration Guide
Version 1.0.1.18
Set new password for web GUI access as Admin. This field is case sensitive.
Enter the new Admin password again to confirm.
SSL Certificate used for SIP Transport in TLS/TCP.
SSL Private key used for SIP Transport in TLS/TCP.
SIP TLS Private Key
Password
SSL Private key password used for SIP Transport in TLS/TCP.
The uploaded custom certificate will be used for SSL/TLS communication
instead of the phone default certificate.
Trusted CA
Certificates
(1 – 6)
Allows to upload and delete the CA Certificate file to phone.
Note: Users can either upload the file directly from web or they can choose to
provision it from their cfg.xml file.
Phone will verify the server certificate based on the built-in, custom or both
trusted certificates list.
The default setting is “Default Certificates”.
If set to "Yes", the keypad can be locked by pressing and holding the STAR *
key for about 4 seconds. And will also allow automatic locking.
If set to "Functional Keys", only "Functional Keys" will be locked but you are
still allowed to make emergency calls. If set to "All Keys", all keys will be locked,
and no emergency calls can be made.
Configures the password to lock/unlock the keypad.
Configures the timeout (in seconds) of idle screen for locking keypad.
Valid range is 0 to 3600.
Defines emergency call numbers. If multiple emergency call numbers are
entered, they should be separated by ','.
System Settings → Preferences
New Message LED
Indicator
Configure the LED indicator mode when there is new voicemail or text
message on the phone. If set to "Off", LED indicator will not light up.
To Next Page
Loading...
Need help?
General
