Grandstream Networks GRP2601 - Page 72

P a g e | 72
GRP260x Administration Guide
Version 1.0.1.18
Enable Headset
Noise Shield
When enabled, the remote party will not hear the environmental noise during
a call using the headset. Choose according to the TX loudness of the
earphone. When the TX loudness of the headset is loud, please select the
"Loud Headset", and when the TX loudness of the headset is soft, please select
the "Thin Headset". "Moderate Headset" is selected by default.
Handset
Handset TX Gain
(dB)
Configures the transmission gain of the handset.
Enable EDRC
Feature
Enable EDRC feature, the remote party will not hear the environmental noise
during a call
Upload Audio
Parameter Mode
Developer function to upload audio parameters for different audio modes.
Upload Audio
Parameter Volume
Developer function to upload audio parameters for each audio volumes
System Settings → TR-069
Enable TR-069
Enables TR-069
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
Default setting is: https://acs.gdms.cloud
TR-069 Username
ACS username for TR-069.
TR-069 Password
ACS password for TR-069.
Periodic Inform
Enable
Enables periodic inform. If set to “Yes”, device will send inform packets to the
ACS. The default setting is “No”.
Periodic Inform
Interval
Sets up the periodic inform interval to send the inform packets to the ACS.
Default is 86400.
Connection Request
Username
The username for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
Connection Request
Port
The port for the ACS to connect to the phone.
CPE SSL Certificate
The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key
The Cert Key for the phone to connect to the ACS via SSL.
Start TR-069 at
Random Time
When enabled, TR-069 will send out first INFORM message to server on
randomized timing between 1 to 3600 seconds after phone boots up.