Grandstream Networks GWN7000 - Figure 7: User Management

GWN7000 VPN Guide
P a g e | 11
1- Create Users
a. Go to “System Settings > User Manager”.
b. Click on button. The following window will pop up.
Figure 7: User Management
c. Enter User information based on below descriptions.
Field
Description
Enabled
Check to enable the user.
Full Name
Choose full name to identify the users.
Username
Choose username to distinguish client’s certificate.
Password
Enter user password for each username.
IPSec Pre-Shared Key
Enter the pre-shared key to connect to VPN server.
This field is used when clients are using pre-shared key.
d. Repeat above steps for each user.
2- Create Client Certificate
a. Go to “System Settings > Cert. Manager > Certificates”.
b. Click on button. The following window will pop up.
c. Enter client certificate information based on below descriptions.