Grandstream Networks GWN7000 Configuration Guide

GWN7000 VPN Guide
P a g e | 15
Table 4: OpenVPN® Server
Field
Description
Enable
Click on the checkbox to enable the OpenVPN® server feature.
VPN Name
Enter a name for the OpenVPN® server.
Server Mode
Choose the server mode the OpenVPN® server will operate with.
4 modes are available:
• PSK: used to establish a point-to-point OpenVPN®
configuration. A VPN tunnel will be created with a server
endpoint of a specified IP and a client endpoint of specified
IP. Encrypted communication between client and server will
occur over UDP port 1194, the default OpenVPN® port.
• SSL: Authentication is made using certificates only (no
user/pass authentication). Each user has a unique client
configuration that includes their personal certificate and key.
This is useful if clients should not be prompted to enter a
username and password, but it is less secure as it relies only
on something the user has (TLS key and certificate).
• User Auth: Authentication is made using only CA, user and
password, no certificates. Useful if the clients should not
have individual certificates.
Less secure as it relies on a shared TLS key plus only
something the user knows (Username/password).
• SSL + User Auth: Requires both certificate and username /
password. Each user has a unique client configuration that
includes their personal certificate and key.
Most secure as there are multiple factors of authentication
(TLS Key and Certificate that the user has, and the
username/password they know).
Protocol
Choose the Transport protocol from the dropdown list, either TCP or
UDP. The default protocol is UDP.
Interface
Select the interface used to connect the GWN7000 to the uplink,
either WAN1, WAN2 or All.
Local Port
Configure the listening port for OpenVPN® server.
The default value is 1194.
Encryption Algorithm
Choose the encryption algorithm from the dropdown list to encrypt
data so that the receiver can decrypt it using same algorithm.
Digest Algorithm
Choose digest algorithm from the dropdown list, which will uniquely
identify the data to provide data integrity and ensure that the receiver
has an unmodified data from the one sent by the original host.

Grandstream Networks GWN7000 Specifications

General

Brand	Grandstream Networks
Model	GWN7000
Category	Network Router
Language	English