Grandstream Networks GXP2160 - Change Log

P a g e | 12
GXP21XX Administration Guide
 Added support to accept P-value in string format for VPK mode configuration xml [P-Value for VPK
Mode in String Format]
 Added pre-Dialing search to include Broadsoft directories [Broadsoft ]
Firmware Version 1.0.7.25
 Added support for Broadsoft XSI authentication type [Settings Page Definitions]
 Added support to configure Broadsoft XSI SIP authentication method by selecting the account [Settings
Page Definitions]
 Added support to stop Screensaver when VPK is active [Settings Page Definitions]
 Added option to disable Auto Location Service from IPVideoTalk server [Settings Page Definitions]
 Added supports for secondary NTP server [Settings Page Definitions]
 Added the ability to specify Eventlist BLF listening transport protocol which will allow the phone to listen
on the incoming notify for the Eventlist through different transport protocol than the one used by SIP
[Eventlist BLF Listening Transport Protocol]
 Added support to play sound notification when one or more monitored BLF is ringing [Settings Page
Definitions]
 Added support to populate configurable User Agent field [Settings Page Definitions]
 Added support to remove audio codec information on call screen [Accounts Page Definitions]
 Added support of BLF call pickup with Barge-In option [Accounts Page Definitions]
 Added option to control Speakerphone RX gain [Settings Page Definitions]
 Added support to display status detail on LCD Screen when Ethernet not connected, account not
register or configured
 Added DNS SRV Fail-over Mode option support [Accounts Page Definitions]
 Added separate subscription expire options for each account [Accounts Page Definitions]
 Added support for default Dial Plan { x+ | \+x+ | *x+ | *xx*x+ } [Accounts Page Definitions]
Firmware Version 1.0.7.15
 Added support for No Touch Provisioning to prompt for username and password for XML config file
download for Broadsoft server. [No Touch Provisioning]
 Changed the default provisioning protocol to HTTPS. This option “Upgrade via” is under phone’s web
UI->Maintenance->Upgrade and provisioning. [Maintenance Page Definitions]
 Added support for outbound notification. [Outbound Notification Support]
 Added support for Virtual Multi-Purpose Keys. [Virtual Multi-Purpose Keys]
 Added support to show programmable keys status on web UI. [Programmable Keys Status On Web
GUI]
 Added option “Auto Provision List Starting Point” on web UI. [Settings Page Definitions]
 Added additional ability to customize DHCP option for provisioning server. [Maintenance Page
Definitions]
 Added support for iLBC and G723. [Accounts Page Definitions]
 Added options for G723 rate, iLBC frame size and payload type. [Accounts Page Definitions]
 Added option to enable and disable session timer. [Accounts Page Definitions]
 Added option to ring speaker for call waiting. [Settings Page Definitions]