GXP21XX Administration Guide 
Displays packet capture status. When user starts to capture trace file, it will 
show “RUNNING” status, otherwise, it will show “STOPPED”. 
Location where the capture will be stored, either “Internal Storage” or “USB” 
Defines  whether the packet capture  file  contains  RTP  or  not. The default 
setting is “No”. 
Filename of the capture. Only required for USB. 
Phonebook Page Definitions 
Table 14: Phonebook Page Definitions 
Specifies Contact’s First Name, Last Name, Phone Number, Accounts and 
Groups to add one new contact in phonebook.   
Deletes all contacts from phonebook. 
Phonebook  Group Management 
Specifies Group’s name to add new group.   
Phonebook  Phonebook Management 
Enable Phonebook 
XML Download 
Configures  to  enable  phonebook  XML  download.  Users  could  select 
HTTP/HTTPS/TFTP to download the phonebook file. The default setting is 
"Disabled".   
The user name for the HTTP/HTTPS server. 
The password for the HTTP/HTTPS server. 
Phonebook XML 
Server Path 
Configures the server path to download the phonebook XML. This field could 
be IP address or URL, with up to 256 characters. 
Phonebook Download 
Interval 
Configures the phonebook download interval (in minutes). If it's set to 0, the 
automatic download will be disabled. The default value is 0. The valid range 
is 5 to 720 minutes. 
Remove Manually-
edited Entries on 
Download 
If  set  to  "Yes",  when  XML  phonebook  is  downloaded,  the  entries  added 
manually will be automatically removed. The default setting is "Yes". 
Sort  phonebook  based  on  the  selection  of  first  name  or  last  name.  The 
default setting is “Last Name”. 
Click on "Download" to download the XML phonebook file to local PC. 
Click on "Upload" to upload local XML phonebook file to the phone.