Screenshots
Users can take screenshots of the GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 phones, by holding
key HOLD and then pressing MENU key, the output will be shown on the phone webGUI under āStatus ļ
System Infoā as shown in the figure below.
Figure 24: Screenshots
Users need to click on āDownloadā in order to view the screenshot.
Multicast Paging
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 supports multicast paging, including sending and
listening. On the phone, users could send multicast page by setting the multicast address and port. Also,
users can listen to at most 10 different multicast IP address.
Multicast sender related settings are under Web UI, Settings -> Programmable keys. Select Multicast
paging as the key mode for dial page call. Multicast paging listening related settings are under Web UI
Settings -> Multicast Paging.
For more details on Multicast paging features, please visit http://www.grandstream.com/support to
download the latest āGXP2130/GXP2140/GXP2160 Multicast Paging User Guideā.
Configuring Eventlist BLF
Grandstream GXP2130/2140/2160/2170/2135 Enterprise IP Phones support both Grandstream UCM Busy
Lamp Filed and Event List BLF features and allows end users, such as attendant, to monitor the call status
of users in the list. GXP2130/2140/2160/2170/2135 supports this feature by sending out the subscription
request to the UCM and changing the indicator status of the Line keys, MPKs, or virtual MPKs that
associated with the monitored users. Additionally, the phone is also able to pick up the calls to the monitored
extensions by using a pre-defined feature code called BLF- Call-pickup Prefix.
For more details on Eventlist BLF configuration guide, please refer to:
http://www.grandstream.com/sites/default/files/Resources/GXP21x0_Eventlist_BLF_Guide.pdf
To Next Page
Loading...
