Grandstream Networks GXP2160 - VPK Modes Icon Indications

P a g e | 52
GXP21XX Administration Guide
phonebook will be accepted.
 Allow Only Favorites: only incoming calls from favorite numbers in the
local phonebook will be accepted.
Disable Transfer
Enables / disables transfer feature. If disabled, call transfer will not be
possible. Default setting is “No”.
In-call Dial Number on
Pressing Transfer Key
Configures the number to be dialed as DTMF using TRANSFER button.
Attended Transfer
Mode
If set to "Dynamic", attended transfers will be performed by default. The
default setting is “Static”.
For more details about “Static” and “Dynamic” transfer, refer to the user
guide.
Do Not Escape #
as %23 in SIP URI
Specifies whether to replace # by %23 or not for some special situations. The
default setting is "No".
Click-To-Dial Feature
Enables Click-To-Dial feature. If this feature is enabled, user could click the
green dial button on left top corner of phone’s Web GUI, then choose the
account and dial to the target number. The default setting is "Disabled".
Default call log type
Sets the default call log list after select MENUCALL HISTORY. Broadsoft
Call Log or Local Call Log option will only show its own list. Default option
will keep both call log lists.
Return Code When
Refusing Incoming
Call
When refusing the incoming call. The phone will send the selected type of
SIP message of the call. Default setting is “ Busy 486”.
Return Code When
Enable DND
When DND is enabled, the phone will send the selected type of SIP
message. Default setting is “ Busy 486”.
Enable BLF Pickup
Screen
By enabling BLF Pickup Screen, when monitored BLF is ringing, GXP should
pop up a BLF information window. The default setting is “No”.
Enable BLF Pickup
Sound
Gives the user the ability to set sound notification to the monitoring BLF line
when it’s ringing, GX21xx should play a sound to inform user. The default
setting is “No”.
BLF Pickup Sound
Except List
Configures the list to be playing BLF sound notification for all except
extensions in this list. Separate extensions by comma (,)
BLF Pickup Sound
Only list
Configures play BLF sound notification only for the list below.
Local Call Recording
Feature
Gives the ability to record calls locally while on the call screen. The default
setting is "Disabled".
Saved Local Call
Recording Location
Location where the recordings will be stored.
Download Local Call
Recordings
When there are recordings presented, you may download them here.
Instant Message
Configures the number of seconds that the message will remain on screen.