- When the PC port mode is set to “Enabled”, another network device can obtain network access by
connecting to GXV3370’s PC port. The PC VLAN tag and PC priority values are only available when
the port mode is set to "Enabled".
- When the PC port mode is set to "Mirrored", the data packet sent and received by the phone would go
through the LAN port and PC port at the same time. In this case, PC port is only used for capturing
debugging packets and unable to support network data exchange.
- If the administrator or user does not plan to use PC port for network device access or troubleshooting
purpose, it is recommended to set PC port mode to “Disable” so any connection through it will be
rejected.
Figure 18: GXV3370 PC Port Mode
To Next Page
Loading...
