Disable Dial Plan
Enables/disables the Dial plan mechanism for different cases. If the specific case is checked, the Dial
plan mechanism will be disabled.
●
Dial Page: It controls the pattern of dialing numbers from the keypad, phone app and account
widget.
●
Contact: It controls the pattern of dialing numbers from local or LDAP.
●
Incoming Call History: It controls the pattern of dialing numbers from inbound call logs.
●
Outgoing Call History: It controls the pattern of dialing numbers from outbound call logs.
●
Programmable Key & Click2Dial: It controls the pattern of dialing numbers from MPK app and
the link on the webpage.
The default setting is unchecking all the cases.
Dial Plan
Configures the dial plan to establish the expected number and pattern of digits for a telephone
number. This parameter configures the allowed dial-plan for the phone.
Dial Plan Rules:
1.
Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d,+
2.
Grammar: x – any digit from 0-9;
●
xx+ or xx. – at least 2-digit numbers
●
xx – only 2-digit numbers
●
^ - exclude
●
[3-5] – any digit of 3, 4, or 5
●
[147] – any digit of 1, 4, or 7
●
<2=011> - replace digit 2 with 011 when dialing
●
| - the OR operand
● + - add + to the dialing number
●
, - play second dial tone.
Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 10-digit numbers with leading digits 1617
Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7-digit numbers
Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allow any number with leading digit 1 followed by a 3-digit number, followed by any number
between 2 and 9, followed by any 7-digit number OR allow any length of numbers with leading
digit 2, replacing the 2 with 011 when dialed.
Example 4: {0,x+}
If user dials 0 second dial tone will be played, and users can continue entering digits. For instance, if
pressing 01234, after pressing 0 second dial tone is played, full number is sent in INVITE.
3.
Default: Outgoing – { x+ | +x+ | *x+ | *xx*x+ }
Allow any number of digits, OR any number with a leading +, OR any number with a leading *, OR
any number with a leading * followed by a 2 digits number and a *. To dial + from keypad, press on
0 until + appears on LCD.
Example of a simple dial plan used in a Home/Office in the US:
{^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
●
^1900x. – prevents dialing any number started with 1900
●
<=1617>[2-9]xxxxxx – allow dialing to local area code (617) numbers by dialing 7 numbers
and 1617 area code will be added automatically
●
1[2-9]xx[2-9]xxxxxx |- allow dialing to any US/Canada Number with 11 digits length
●
011[2-9]x. – allow international calls starting with 011
●
[3469]11 – allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases, where the user wishes to dial strings such as *123 to activate voice mail or
other applications provided by their service provider, the * should be predefined inside the dial plan
feature. An example dial plan will be: {*x+} which allows the user to dial * followed by any length of
numbers.
Caller IDs
To Next Page
Loading...
Need help?
General
