Grandstream Networks GXV3480 Manual

Virtual
Account
Group
It is used to set to categorize accounts in server mode groups, the accounts in the same group will be
combined as one and the account widget will display the Caller ID in the account with lowest ID. The phone
can answer any incoming calls to each account in groups.
If user makes an outbound call, the phone system will use the lowest ID account by default. If the account
fails or SIP INVITE message is timeout, the phone system will failover to the next account in the group with
higher account ID.
If all the accounts are not available in the group, the phone system will traverse all the accounts in the
group and notify the end users the session is failed.
Allows users to synchronize XML phonebook upon receiving SIP NOTIFY message with header
Event: sync-
Allow Sync
contacts
Phonebook
Note: Received SIP NOTIFY will be first challenged for authentication purpose before contacting configured
via SIP
server to download XML phonebook. The parameters used are the ones configured at [Download Contacts].
Notify
The authentication can be done either using admin credentials (if no SIP account is configured) or using SIP
account credentials. Default is “Yes”.
Table 24: Account/SIP/Advanced Settings
Account/SIP/Special Features
Special Features
Configures phone’s settings to meet different vendors’ server requirements.
Users can choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS, Mobotix, ZTE NGN, or Huawei
IMS depending on the server type.
Call Settings
Feature Key
Synchronization
This feature is used for BroadSoft / Metaswitch call feature synchronization. When it’s set to BroadSoft
/ Metaswitch, DND and Call Forward features can be synchronized with BroadSoft / Metaswitch server.
The call forward function will take effect on the server side while the local call forward function is not
effective.
The default setting is “Disable”.
Enable BroadSoft
Call Park
Configures whether to send SUBSRCIRBE message to BroadSoft server to obtain Call Park notifications.
The default setting is “No”.
Conference URI
Configures the network-based conference URI (the BroadSoft Standard). If it is configured, end user
needs to tap the N-way key during the conference to transfer the host to the remote media server.
Broadsoft Call
Center
When enabled, Feature Key Synchronization will be enabled regardless of web settings. Default is
Disabled.
Hoteling Event Enables BroadSoft Hoteling Event feature. Default is Disabled.
Call Center Status
When set to “Yes”, the phone will send SUBSCRIBE to the server to obtain call center status. Default is
Disabled.
SCA

Grandstream Networks GXV3480 Specifications

General

Brand	Grandstream Networks
Model	GXV3480
Category	Conference System
Language	English