Grandstream Networks, Inc. GXW410x User Manual Page 28 of 35
Firmware Version 1.3.4.13 Last Updated: 3/2012
S
AVING THE CONFIGURATION CHANGES
Once a change is made, press the “Update” button in the Configuration Menu. The GXW410x will display
the following screen to confirm that the changes have been saved. To activate changes, reboot or power
cycle the GXW410x after all changes are made.
R
EBOOTING FROM REMOTE
The administrator can remotely reboot the unit by pressing the “Reboot” button at the bottom of the
configuration menu. The following screen will indicate that rebooting is underway.
The user can re-login to the unit after waiting for about 30 seconds.
To Next Page
Loading...
