Grandstream Networks GXW4216 User Manual

P a g e | 43
GXW42xx User Manual
Version 1.0.15.30
3CX Auto Provision
Default is No. If set to Yes, phone will multicast SUBSCRIBE for
provision if this feature is enabled.
Automatic Upgrade
Choose “Yes” to enable automatic upgrade and provisioning. When set
to No, GXW42XX will only do upgrade once at boot up.
When “Check every day” or “Check every week” is checked, user can
specify “Hour of the day (0-23)” or “Day of the week (0-6)”. Default time
is Monday 1AM.
Authenticate Conf File
If set to Yes, configuration file is authenticated before being accepted.
This protects the configuration from unauthorized modifications.
Firmware Key
For firmware encryption. It should be 32-digit in Hexadecimal
Representation. End user should keep it blank.
Upload Device
Configuration
Upload the Config file to reload settings.
Upload Device Firmware
Upload .bin file to the device to upgrade the firmware.
Device Configuration (Text
format)
Click to download the device configuration file in .txt format.
Device Configuration (XML
format)
Click to download the device configuration file in .xml format.
Web/SSH Access
HTTP Web Port
By default, HTTP uses port 80. This field is for customizable web port.
HTTPS Web Port
By default, HTTP uses port 443. This field is for customizable web port.
Web Access Mode
Specify Web Access Protocol. HTTP or HTTPS. Default is HTTP.
Disable SSH
If set to Yes, SSH access will be disabled. Default is No.
Lockout Time Interval
If login attempt failed 5 times, login would be locked out for the time
length. (Default 15 mins. Range 1-15 min).
User Password
Set new password for web GUI access as User. This field is case sensitive
with a maximum length of 30 characters.
Admin Password
Set new password for web GUI access as Admin. This field is case
sensitive with a maximum length of 30 characters.

Grandstream Networks GXW4216 Specifications

General

Brand	Grandstream Networks
Model	GXW4216
Category	Gateway
Language	English