P a g e | 7
GXW42xx User Manual
Version 1.0.15.30
CHANGE LOG
This section documents significant changes from previous versions of GXW42XX user manuals. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.
Firmware version 1.0.5.30
No major changes.
Firmware version 1.0.5.28
Added option to specify the priority for caller ID display [Caller ID Display]
Added option to save syslog locally. [Save Syslog]
Added option “Prefer Primary Outbound Proxy” to enable registration through primary outbound proxy
if registration expires. [Prefer Primary Outbound Proxy]
Added feature “White list for WAN side” and “Black list for WAN side” for remote management. [Access
Control Lists]
Added feature” Lockout time interval” to change banning time after too many failed login attempts.
[Lockout Time Interval].
Added option “Web Access Mode” to choose between “HTTPS” and “HTTP” to access device Web UI.
[Web Access Mode]
Added option “HTTPS Web Port” to set HTTPS web port instead of using default web port. [HTTPS
Web Port]
Added local firmware upgrade support. [Upload Device Firmware]
Change “Disable Telnet” option to “Disable SSH” option for more security. [Disable SSH]
Firmware version 1.0.5.16
Added option [DTMF-RELAY Tag Respect SIP INFO] [Use Request Routing ID in SIP Headers] for
Profile 1-4 audio settings.
Added the option of [Crypto Life Time] to support RTP settings.
Added option [Play busy/reorder tone before Loop Current Disconnect] for Profile 1-4 audio settings.
Added the option of [Disable Connected Line ID] to support not display the connected line ID.
Added the option of [Flash Digit Control] [Crypto Life Time] to overrides the default settings for call
control.
Added option to configure [Local RTP port].
Added the option to configure [SIP Registration Failure Retry Wait Time upon 403 Forbidden].
Added the option to enable/disable [Hold Target Before Refer].
To Next Page
Loading...
Need help?
General
