Grandstream Networks GXW4216

P a g e | 8
GXW42xx User Manual
Version 1.0.15.30
 Added the option to enable/disable [Authenticate server certificate domain].
 Added the option to enable/disable [Authenticate server certificate chain].
 Added the option to configure [Trusted CA certificates].
 Added the function of [Automatic Reboot].
 Added the option to [Allow DHCP Option 42 to NTP Server] to support Time and Date settings.
 Added the option to [Allow DHCP Option 2 to override time zone] to support Time and Date settings.
 Added the option to enable/disable [3CX Auto Provision] to support multicast SUBSCRIBE for provision.
Firmware version 1.0.5.8
 Added option [SIP REGISTER Contact Header Uses] [Use Request Routing ID in SIP Headers] for
Profile 1-4 to support NAT transfer feature.
Firmware version 1.0.5.5
 Added option [Enable Fast RFC2833] to set DTMF duration by RFC2833.
 Added SNMP support. Added [SNMP] section.
 Added QoS settings for SIP and RTP packets. Rearranged options [Layer 2 QoS Settings] and [Layer
3 QoS Settings].
 Added star code [*98] to play registration ID
 Added star code [*99] to trigger provisioning process.
 Added support to download device configuration file.
Firmware version 1.0.4.22
 Added support for audio codec G.722
 Added option [Always send HTTP Basic Authentication Information] to enable sending HTTP
authentication without server challenge
 Added the options to enable/disable [Use P-Preferred-Identity Header] and [Use Privacy Header]
 Added the options to enable/disable [Do Not Escape '#' as %23 in SIP URI]
Firmware version 1.0.4.17
 Added option [Use Request Routing ID in SIP Headers] to enable/disable device to use configured
Request URI Routing ID for certain FXS port in its SIP message Header when a trunk SIP account is
used.
 Added option [Add Auth Header on Initial REGISTER] to enable/disable including authentication header
in the initial REGISTER.