P a g e | 69
GXW42xx User Manual
Version 1.0.15.30
22 (press the “2” key twice, “A” will show on the LCD)
33 (press the “3” key twice, “D” will show on the LCD)
For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”.
Note:
1. Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”.
2. If still have difficulties to get access to the device, pushing the reset button during booting up will trigger
the RECOVERY MODE, and device will use static IP 192.168.1.234/24. Put your PC under the same
subnet, and then you will be able to open the RECOVERY MODE web page on 192.168.1.234 by your
web browser.
3. While attempting to trigger the RECOVERY MODE, do not loose reset button until device enters
recovery mode.
4. Admin password is needed to login RECOVERY MODE and to get the respond key if "Lock Keypad
update" is set to "Yes".