Grandstream Networks GXW42XX series User Manual

FIRMWARE 1.0.4.4 GXW42XX USER MANUAL PAGE 20 OF 57
BASIC OPERATIONS
UNDERSTANDING GXW VOICE PROMPTS
GXW42XX has a built-in voice prompt menu for simple device configuration. To enter the voice prompt
menu, press *** on the standard analog phone connected to any FXS port.
TABLE 5: DEFINITIONS OF THE GXW VOICE PROMPTS
Menu
Voice Prompt
User’s Options
Main Menu
“Enter a Menu Option”
Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter “001 – 005, 007, 010, 013 - 017, 047, 086 or 099” Menu
option
Enter “9” for confirming a option
001
“DHCP Mode”, “PPPoE
Mode ”or “Static IP Mode”
Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need configure all the IP
address information through menu 002 to 005. If user selects
“Dynamic IP Mode”, the device will retrieve all IP address
information from DHCP server automatically when user reboots
the device.
002
“IP Address “ + IP address
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
003
“Subnet “ + IP address
Same as Menu option 002
004
“Gateway “ + IP address
Same as Menu option 002
005
“DNS Server “ + IP address
Same as Menu option 002
007
Preferred Vocoder
Enter “9” to go to the next selection in the list:
 PCM U
 PCM A
 iLBC
 G-726
 G-723
 G-729
010
“MAC Address”
Announces the Mac address of the unit.
013
Firmware Server IP
Address
Announces current Firmware Server IP address. Enter 12 digit
new IP address.
014
Configuration Server IP
Address
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
015
Upgrade Protocol
Upgrade protocol for firmware and configuration update. Enter

Grandstream Networks GXW42XX series Specifications

General

Brand	Grandstream Networks
Model	GXW42XX series
Category	Gateway
Language	English