FIRMWARE 1.0.4.4 GXW42XX USER MANUAL PAGE 57 OF 57
A: 22 (press the “2” key twice, “A” will show on the LCD)
B: 222
C: 2222
D: 33 (press the “3” key twice, “D” will show on the LCD)
E: 333
F: 3333
For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”.
NOTE:
1. Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”.
2. If still have difficulties to get access to the device, pushing the reset button during booting up will
trigger the RECOVERY MODE, and device will use static IP 192.168.1.234/24. Put your PC under the
same subnet, and then you will be able to open the RECOVERY MODE web page on 192.168.1.234
by your web browser.
To Previous Page
Loading...
Need help?
General
