Grandstream Networks HT502 - Page 35

P a g e | 34
HT502 User Manual
PPPoE Service Name
Default is blank. This field is optional. If your ISP uses a service name for the
PPPoE connection, enter the service name here.
Time Zone
Controls how the date/time is displayed according to the specified time zone.
Self Defined Time
Zone
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
Time zone with 6 hours offset with 1 hour ahead which is the US central time. It
is positive (+) if the local time zone is west of the Prime Meridian and negative (-)
if it is east.
Prime Meridian (a.k.a: International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1
st
number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2
nd
number indicates the n
th
iteration of the weekday: (1st Sunday, 3rd
Tuesday etc)
The 3
rd
number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
Therefore, this example is the DST which starts from the second Sunday of March
to the 1st Sunday of November.
Language
Languages supported with voice prompt and web interface, except Spanish that
it is only in IVR.
Device Mode
This parameter controls whether the device is working in NAT router mode or
Bridge mode. Save the setting and reboot prior to configuring HT502.