Changes from 1.0.12.4 User Manual
Added option [SIP Timer D] to configure RFC 3261 timer D in Advanced Settings.
Changed option name from [Allow DHCP Option 66 to override server] to [Allow DHCP Option 66 or 160
to override server]. Now the option160 can be abled/disabled along with option 66 on DHCP server at
the same time.
Added feature [Download Device XML Configuration] in advanced settings allows to download device
XML configuration to local directory.
Addied feature [Upload firmware] in advanced settings allows user to upload firmware file from local
directory.
Addied feature [Upload configuration] in advanced settings allows user to upload configuration file from
local directory.
Changes from 1.0.12.1 User Manual
Added the options to enable/disable [Always send HTTP Basic Authentication Information]
Added the options to restrict the m field sent in SDP [Disable Multiple m line in SDP]
Changes from 1.0.11.3 User Manual
Added the options to enable/disable [Do Not Escape '#' as %23 in SIP URI]
Added network whist/black list function on WAN port [White list for WAN side] [Black list for WAN side]
Changes from 1.0.10.9 User Manual
Added the options to enable/disable [Use P-Preferred-Identity Header] and [Use Privacy Header]
Added the option to enable/disable [Add Auth Header On Initial REGISTER]
Changes from 1.0.9.1 User Manual
Added option to change phone LED pattern rule. [Phone LED Pattern]
Added list [Blacklist For Incoming Calls] to block certain incoming number.