IP address or domain name of firmware server.
IP address or domain name of configuration server.
The password used for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration file.
The user name needed to authenticate with the HTTP/HTTPS server.
The password needed to authenticate with the HTTP/HTTPS server.
Always send HTTP
Basic
Authentication
Information
Default is Send HTTP Basic Authentication Information only when
challenged. If set to Always, device will send configured user name and
password within HTTP request without server sending authentication challenge.
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
This field enables user to store different configuration files in one single directory
on the configuration server. If configured, only the configuration file with the
matching prefix will be downloaded.