If Syslog is enabled and Send SIP Log is set to YES, then SIP messages will also
be delivered via Syslog. Default is set to NO.
Download Device
Configuration
Allows user to download and save a text file containing all the P values of each
setting as configured at that point on the unit. (Note: For Security Reasons, all
Passwords won’t be Downloaded)
Download Device
XML Configuration
Allows user to download and save a XML file containing all the P values of each
setting as configured at that point on the unit. (Note: For Security Reasons, all
Passwords won’t be Downloaded)
Allows user to upload firmware file from local directory.
Allows user to upload configuration file from local directory.
Table 11: Account settings
When set to Yes the FXS port is activated.
SIP Server’s IP address or Domain name provided by VoIP service provider.
Failover SIP Server’s IP address or Domain name in case primary server does
not respond.
Prefer Primary SIP
Server
Default is no. If set to yes it will register to Primary Server if registration with
Failover server expires
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session
Border Controller. Used by HT502 for firewall or NAT penetration in different
network environments. If symmetric NAT is detected, STUN will not work and
ONLY outbound proxy can correct the problem.
To Next Page
Loading...
Need help?
General
