Grandstream Networks HT502 User Manual

P a g e | 33
HT502 User Manual
 AAL2 (all G.726)
Table 8: Basic settings
End User Password
Password to access the Web Configuration Menu. This field is case sensitive
with a maximum length of 25 characters.
Web Port
By default, HTTP uses port 80. This field is for customizable web port.
Telnet Server
Default is set to YES.
IP Address
There are two modes to operate the HT502:
DHCP mode: all the field values for the Static IP mode are not used (even though
they are still saved in the Flash memory.) The HT502 acquires its IP address from
the first DHCP server it discovers from the LAN it is connected. Using the PPPoE
feature: set the PPPoE account settings. The HT502 will establish a PPPoE
session if any of the PPPoE fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP
address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields
are set to zero by default.
DHCP hostname
Default is blank. This option specifies the name of the client. This field is optional
but may be required by some Internet Service Providers.
DHCP vendor class
ID
Default is HT500. Used by clients and servers to exchange vendor-specific
information..
PPPoE account ID
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point
Protocol over Ethernet) connection.
PPPoE password
PPPoE account password.

Grandstream Networks HT502 Specifications

General

Brand	Grandstream Networks
Model	HT502
Category	Telephone Accessories
Language	English