HT812/HT814 Administration Guide
detect
network
connectivity
not yield any response for configured number of times (minimum 3), the device will
restart the TCP/IP stack. If the STUN server does not respond when the device boots
up, the feature is disabled. Default setting is No.
Use DNS to detect
network
connectivity
Uses DNS to detect WAN side network problems. Default setting is No.
Verify host when
using HTTPS
Enables / disables the host verification when using HTTPS.
Firmware upgrade
and provisioning
Selects firmware upgrade/provisioning method: TFTP, HTTP or HTTPS.
Sets IP address or domain name of firmware server. The URL of the server that hosts
the firmware release. Default is fm.grandstream.com/gs.
Sets IP address or domain name of configuration server. The server hosts a copy of the
configuration file to be installed on the HT812/HT814. Default is
fm.grandstream.com/gs.
Decrypts XML configuration file when encrypted. The password used for encrypting the
XML configuration file using OpenSSL.
Enters user name to authenticate with HTTP/HTTPS server.
Enters password to authenticate with HTTP/HTTPS server.
Checks if firmware file is with matching prefix before downloading it. This field enables
user to store different versions of firmware files in one directory on the firmware server.
Checks if firmware file is with matching postfix before downloading it. This field enables
user to store different versions of firmware files in one directory on the firmware server.
Checks if configuration files are with matching prefix before downloading them. It
allows user to store different configuration files in one directory on the provisioning
server.
Checks if configuration files are with matching postfix before downloading them. It
allows user to store different configuration files in one directory on the provisioning
server.
Obtains configuration and upgrade server’s information using options 66 from DHCP
server.