Grandstream Networks HT814 Administration Guide

P a g e | 27
HT812/HT814 Administration Guide
Override Server
Note: If DHCP Option 66 is enabled, the HT812/HT814 will attempt downloading the
firmware file from the server URL provided by DHCP, even though Config Server
Path is left blank
3CX Auto
Provision
Sends multicast “SUBSCRIBE” message for provisioning at booting stage, used for PnP
(Plug-and-Play) configuration. Default is Yes.
Automatic
Upgrade
Specifies when the firmware upgrade process will be initiated; there are 4 options:
 No: The HT812/HT814 will only do upgrade once at boot up.
 Check every X minutes: User needs to specify a period in minutes.
 Check every day: User needs to specify “Hour of the day (0-23)”.
 Check every week: User needs to specify “Hour of the day (0-23)” and “Day of
the week (0-6)”. (Day of week is starting from Sunday). Default is No.
Always Check for
New Firmware at
Boot up
Configures the HT812/HT814 to always search for the new firmware at boot up. During
the boot stage, the HT802 will contact the firmware upgrade server to search for a new
firmware, when available it will start the upgrade process, otherwise it will boot normally.
Check New
Firmware only
when F/W
pre/suffix changes
Configure the HT812/HT814 to search for the new firmware when the firmware prefix /
suffix changes. When this option is selected, the HT812/HT814 will check for updates
only when the pre/suffix has been changed.
Always Skip the
Firmware Check
Configures the HT812/HT814 to skip the firmware check, when this option is selected the
HT802 will always skip searching for a new firmware.
Disable SIP
NOTIFY
Authentication
Disables the SIP NOTIFY Authentication on the phone adapter. If set to “Yes”, the phone
adapter will not challenge NOTIFY with 401. Default is No
Authenticate
Conf File
Authenticates configuration before being accepted. This protects the configuration from
unauthorized modifications. Default is No.
SIP TLS Certificate
Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT812/HT814
has built-in private key and SSL certificate.
SIP TLS Private
Key
Specifies TLS private key used for SIP over TLS is in X.509 format.
SIP TLS Private
Key Password
Specifies SSL Private key password used for SIP Transport in TLS/TCP.
Enable TR-069
Sets the phone adapter system to enable the “CPE WAN Management Protocol” (TR-
069). Default setting is No.

Grandstream Networks HT814 Specifications

General

Brand	Grandstream Networks
Model	HT814
Category	Telephone Accessories
Language	English