Grandstream Networks HT814 Administration Guide

P a g e | 28
HT812/HT814 Administration Guide
ACS URL
Specifies URL of TR-069 Auto Configuration Servers (e.g., http://acs.mycompany.com),
or IP address.
ACS Username
Enters username to authenticate to ACS.
ACS Password
Enters password to authenticate to ACS.
Periodic Inform
Enable
Sends periodic inform packets to ACS. Default is No
Periodic Inform
Interval
Sets frequency that the inform packets will be sent out to ACS.
Connection
Request Username
Enters username for ACS to connect to the HT812/HT814.
Connection
Request Password
Enters password for ACS to connect to the HT812/HT814.
CPE SSL
Certificate
Configures the Cert File for the phone adapter to connect to the ACS via SSL.
CPE SSL Private
Key
Specifies the Cert Key for the phone adapter to connect to the ACS via SSL.
System Ring
Cadence
Sets ring cadences for all incoming calls. Syntax: c=on1/off1-on2/off2-on3/off3;) Default
is set to c=2000/4000; (US standards) on1 is the period of ringing ("On time" in "ms")
while off1 is the period of silence. Up to three cadences are supported.
Call Progress
Tones
Configures tone frequencies according to user preference. By default, the tones are set
to North American frequencies. Frequencies should be configured with known values to
avoid uncomfortable high pitch sounds. ON is the period of ringing (ON time in ms) while
OFF is the period of silence. In order to set a continuous ring, OFF should be zero.
Otherwise it will ring ON ms and a pause of OFF ms and then repeats the pattern.
 “Dial tone”
 “Ring back tone”
 “Busy tone”
 “Reorder tone”
 “Confirmation tone”
 “Call-Waiting tone”
 “Prompt Tone”
Please refer to the document below to determine your local call progress tones:
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf

Grandstream Networks HT814 Specifications

General

Brand	Grandstream Networks
Model	HT814
Category	Telephone Accessories
Language	English