Grandstream Networks HT814 Administration Guide

P a g e | 29
HT812/HT814 Administration Guide
Prompt Tone
Access Code
Specifies the key pattern to get Prompt Tone. Maximum 20 digits
Lock Keypad
Update
Locks configuration update via keypad. Default is No.
Disable Voice
Prompt
Removes ability to use integrated voice prompt menu configuration. Default is No.
Disable Direct IP
Call
Deactivates Direct IP-to-IP calling function. Default is No.
NTP Server
Defines URL or IP address of the NTP (Network Time Protocol). Used by the
HT812/HT814 to synchronize the date and time. Public NTP servers can be found at
http://www.ntp.org . Default is pool.ntp.org
Allow DHCP Option
42 to NTP Server
Obtains NTP server address from a DHCP server using DHCP Option 42; it will
override configured NTP Server. If set to “No”, the HT812/HT814 will use configured
NTP server to synchronize time and date even if a NTP server is provided by DHCP
server. Default is Yes.
Syslog Server
Sets IP address or URL of system log server. The server collects system log
information from the HT812/HT814.
Syslog Level
Selects log level; the level is one of DEBUG, INFO, WARNING, ERROR. Syslog
messages are sent based on the following events. Default is NONE.
1. Product model/version on boot up (INFO level)
2. NAT related info (INFO level)
3. Sent or received SIP message (DEBUG level)
4. SIP message summary (INFO level)
5. Inbound and outbound calls (INFO level)
6. Registration status change (INFO level)
7. Negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. Memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components:
GS_LOG: [device MAC address] [error code] error message
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]
Ethernet link is up

Grandstream Networks HT814 Specifications

General

Brand	Grandstream Networks
Model	HT814
Category	Telephone Accessories
Language	English