Figure 9: Viewer Level Password
Changing HTTP Web Port
1. Access your HT812/HT814 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings → HTTP Web Port.
5. Make sure that the Web Access Mode is set to HTTP.
6. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings
Figure 10: Web HTTP Port
Configuring HT812/HT814 Through Voice Prompts
As mentioned previously, The HT812/HT814 has a built-in voice prompt menu for simple device
configuration. Please refer to “Understanding HT812/HT814 Interactive Voice Prompt Response Menu” for
more information about IVR and how to access its menu.
To Next Page
Loading...
Need help?
General
